Oricom Technologies
www.oricomtech.com
Return to: BOTCOP-SVO page.

BOTCOP-SVO Interfacing Code

---- UNDER CONSTRUCTION - CHECK BACK LATER ----

Basic Stamp BS2 Module

  • download sample code for BS2 module control of BOT-COP board - bcop-bs2.zip (6 Kbytes, revised 02.2006) - includes sound transducer and servo control.

    OOPic-C Module

    Netmedia BX-24 Module

    Basic Atom 24 Module

    24-pin Module Reset Pin. Note that the different BS2-compatible 24-modules require different protocols on pin-4, the reset pin, of the DB09 serial interface connector.

  • the BS2 requires a serial capacitor in the line between DB09 and reset pin on the module, plus a capacitor to ground on the module reset pin.
  • the Atom-24 and BX-24 require a jumper from DB09 pin-4 to the module reset pin, which must be inserted for programming, but removed for general operation after programming.
  • the OOPic-C does not use reset via pin-4 of the DB09 connector.
  • Note that the BOT-COP controller boards are designed to handle all 3 situations.

    <| TOP

    Bot-CoPs is a trademark of Oricom Technologies.
    © Oricom Technologies, revised Feb 2006